MODIG HHV2 Specification
MODIG's Horizontal High Velocity machining centre HHV2 is ideal for short repetitive runs or high-volume production
The HHV2 machining centre handles uncut bars and extrusions so no pre-cutting of raw material is required, significantly reducing cycle time!
HHV2 delivers up to 50% faster machining time over conventional processes.
HHV2 Technical Specification:
TRAVELS| X-axis | 1,500 | mm |
| Y-axis | 420 | mm |
| Z-axis | 260 | mm |
| U1-axis | 1170 | mm |
| B-axis optional | +/- 15 | degrees |
| A1/A2-axis | 190 | degrees |
MAX PART CROSS SECTION
|
Bar standard * |
127x127 | mm |
| Extrusion | 150 x 250 | mm |
* Options for larger bar sizes are available
ROTARY CHUCKS
| Feed rates | 0-60 | rpm |
| Jaw Change System | Quick change | 1 min/ rotary chuck |
| Number of rotary tables | 2 |
ALUMINIUM SPINDLE
| Speed | 0-30,000 | rpm |
| Power S1 | 45 | KW |
HARD METAL SPINDLE
| Speed | 0-20,000 | rpm |
| Torque S1 | 80 | Nm |
TOOL CHANGER
| Number of tools standard | 55 | more on request |
| Tool taper | HSK-A63 | |
| Tool changing time | 8 | sec, chip to chip |
FEED RATES
| X-Y-Z axes | 0-60 | m/min |
| A-axis, A1 and A2 | 60 | rpm/min |
| B-axis optional | 60 | rpm/min |
ACCELERATION
| Acceleration | 10 | m/square second |
MATERIAL
| Aluminium, composite, steel, titanium |
If you would like to view the HHV2 specification in feet and inches then please visit the MODIG Machine Tool website.
Specifications for other MODIG advanced machining centres:
- MODIG EVM-2 specification
- MODIG HHV3 specification
- MODIG RigiMill MG specification
- MODIG RigiMill MT specification